Store

62 Series Shock

AFCO 62 Series are premier late model shocks. Threaded body aluminum mono-tube, comes with coil-over hardware and special gas canister. Double adjustable, compression and rebound adjust independent of each other. 6" stroke, standard adjustment range is 3-6 compression and rebound.

California Proposition 65 Statement

1968-72 Chevrolet Chevelle Replacement Frame Kit

Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies. The Frame’s material is the same grade and thickness as the OEM frame and welds very consistent. Frame assembly is both easy and consistent due to the locating tabs having built-in stops for alignment. The Cross member has clearance built in the back side for radiator placement and in the front side for steering components. The Cross member has been lowered on the left upper side for steering shaft clearance. The Cross member has 5/16” locating holes on the lower section for correct indexing of horn placement for easy fitment. The frame’s front horns have been notched in the spring pocket area for ease of spring changes. This allows the stamping to be stronger in the spring pocket area, as the metal is not pulled in different areas as the factory frames are. The horns and the rear lower control arm mounts have two 5/16” locating holes to locate the correct rear control arm placement. The frame rails have locating tabs for easy placement to frame horns. The weight of the AFCO frame is the same as the factory OEM frame with the same cuts. Replacement individual right and left horns and right frame rails are available for crash repair.

Features & Benefits

  • Saves up to 6 hours of build time.
  • Locating tabs for easy assembly.
  • Excellent drag link and radiator clearance.
  • Replacement parts available!
  • Factory steering bolts directly on.
  • Pre-cut spring pockets.

Note: For Racing Purposes Only. This frame will not work with passenger or street cars.

part #40000

21 Series Shock

AFCO aluminum mono-tube, fixed valve late model shocks. Threaded body for ease of installing coil-over springs. This gas pressure shock allows racer to change pressure to his/her preference. Owner serviceable with custom valving available. Uses coil-over kit # 20135. Made in the USA. 6" stroke with 3 valve on compression and rebound.

California Proposition 65 Statement

EDGE Series Shocks

Shock package, modified slick track pack. Shocks in package are (1)19E1-LF-S, (1)19E1-LR-S (1) 19E1-RF-B and (1) 19E!-RR-S.

California Proposition 65 Statement

24 Series Shock

AFCO steel mono-tube, fixed valve late model shocks. Smooth body for use with or without coil-over applications. This gas pressure shock, without Schrader valve, comes with pre-set gas pressure. theses shocks are IMCA legal. Made in the USA. 7" stroke with 3 valve on compression and rebound. 12.95" compressed and 18.85" extended. 7" shocks are not grooved for coil-over kits.

California Proposition 65 Statement

23 Series Shock

AFCO steel mono-tube, fixed valve late model shocks. Smooth body for use without coil-over applications. This gas pressure shock, with Schrader valve, allows racer to change pressure to his/her preference. Owner serviceable with custom valving available. Made in the USA. 7" stroke with 3 valve on compression and rebound. 12.95" compressed and 18.85" extended. 7" shocks are not grooved for coil-over hardware.

California Proposition 65 Statement

7" Double Adjustable Twin Tube with Slick Track Valve and Short Rod End AFCO

7" aluminum threaded body shock, double adjustable, twin tube design, valved on compression 2-4 for slick track conditions and rebound is 4-8 single high speed rebound. Has short adjustable rod end. (Z) Compressed length 13.18" and extended 20.10"

California Proposition 65 Statement

part #3770SZ

80103- Radiator Series

AFCO single pass Ford, Mopar racing radiator 26" W x 19" T offers great fit and performance, along with an optimized fin count ratio for maximum cooling efficiency. ALL AFCO radiators offer a furnace brazed sealed core without the use of epoxy, and are all 100% tested before shipping.
California Proposition 65 Statement

55 Series Shock 9" Stroke

Steel Silver Series bulb shocks that has a 7" stroke with Schrader valve and base valve design. Owner serviceable. Compressed length 13.25" , extended 19.44". Shock valved at 9 compression and 9 rebound. Base valve allows lower pressure without cavitation.

California Proposition 65 Statement

32 Series Shock

Shock Type: Monotube
Shock Body Material: Aluminum
Shock Body Size: Large Body
Shock Body Type: Threaded
Shock Stroke Range: 7.00" to 7.99"
Shock Stroke: 7.00
Upper Shock Mount: Spherical Rod End
Lower Shock Mount: Spherical Rod End
Compression Valving: 3 - 6
Rebound Valving: 4 - 8

California Proposition 65 Statement

37 Series Shock

AFCO 37 Series are twin tube, aluminum body, threaded double adjustable shocks. Standard adjustment ranges are 3-6 compression and rebound. Special valve code are available for this shock. 7" stroke. Includes coil-over hardware.

California Proposition 65 Statement

Aluminum Black Radiator Circle Track 27.5 inch Double Pass Chevy 20AN Inlet AFCO

AFCO double pass GM style racing radiator 27 1/2" W x 19" T w/-20 AN male inlet version offers great fit and performance, along with an optimized fin count ratio for maximum cooling efficiency. The black ceramic dura-coating helps increase efficiency as well. ALL AFCO radiators offer a furnace brazed sealed core without the use of epoxy, and are all 100% tested before shipping.
California Proposition 65 Statement

part #80101NDP-20B

Aluminum Black Radiator Circle Track 27.5 inch Double Pass Chevy 16AN Inlet AFCO

AFCO double pass GM style racing radiator 27 1/2" W x 19" T w/-16 AN male inlet version offers great fit and performance, along with an optimized fin count ratio for maximum cooling efficiency. The black ceramic dura-coating helps increase efficiency as well. ALL AFCO radiators offer a furnace brazed sealed core without the use of epoxy, and are all 100% tested before shipping.
California Proposition 65 Statement

part #80101NDP-16B

16 Series Shock - Remote Gas

AFCO double adjustable small body Aluminum shock. 6" stroke, compression adjustable 2-5 valve and rebound adjustable 1-5 valve. 5/8" durable shaft for strength, with gas canister and 18" hose. Mono-tube shock, made in the USA.

California Proposition 65 Statement

Pages