Store

Shock Bearing and Clip AFCO

Shock bearing and clip for AFCO shocks. Fits all Series of AFCO shocks. 1/2" inside diameter, 1.060 outside diameter, .390 thick. Best replacement bearing on the market.

part #1000

Aluminum 4 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotone design that features a wide range of rebound adjustability without bleeding over into compression changes. This 4" shock comes with coil-over hardware. 12.22 comp x 16.17 ext. length= best for 12.25"-13.25" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 7" or 8" spring sold separately.

part #6845

Aluminum 5 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotube design that features a wide range of rebound adjustability without bleeding over into compression changes.  This 5" shock comes with coil-over hardware. 13.22 comp x 18.17 ext. length= best for 13.75-14.75" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 10" or 12" spring sold separately.

part #6855

Aluminum 6 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotone design that features a wide range of rebound adjustability without bleeding over into compression changes. This 6" shock comes with coil-over hardware. 14.22 comp x 20.17 ext. length= best for 14.75-16.75" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 14" spring sold separately.

part #6865

Aluminum 7 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotone design that features a wide range of rebound adjustability without bleeding over into compression changes. This 7" shock comes with coil-over hardware. 15.22 comp x 22.17 ext. length= best for 16.5-18.5" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 14" spring sold separately.

part #6875

Aluminum 8 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotone design that features a wide range of rebound adjustability without bleeding over into compression changes. This 8" shock comes with coil-over hardware. 16.22 comp x 24.17 ext. length= best for 18-21" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 14" spring sold separately.

part #6885

Aluminum 9 Inch Stroke Coil-over Single Adjustable Reactor Shock AFCO

AFCO's Reactor Series Single Adjustable Drag Shock is an economical alternative to a fully adjustable design. Monotone design that features a wide range of rebound adjustability without bleeding over into compression changes. This 9" shock comes with coil-over hardware. 17.22 comp x 26.17 ext. length= best for 19.5"-23" centers at ride height. Valve range covers 1,000 hp or less applications (for higher hp check out our "Big Gun" series.) Recommended 14" spring sold separately.

part #6895

Steel Wheel Stud 5/8 Inch Diameter Coarse Thread with .812 Inch Knurl AFCO

The steel wheel stud is 3 inches long and 5/8"-11 UNC thread that fits any hub that requires a 5/8 stud and a .812" knurled shoulder. The stud is made from high quality grade 8 pre-stressed aerospace material and is black oxide coated for ultimate durability and corrosion resistance.

part #10152

Quick Pin 2 1/2" AFCO

Detented quick pin makes for quick shock changes during heat of action. The 2.5" long pin will go thru shock and mount for secure attachment without the use of tools. Push the release button and pull the pin to undo the shock end.

part #10156

Steel Wheel Stud 5/8 Inch Diameter X 4 Inches Long Coarse Thread with .812 Inch Knurl AFCO

The steel wheel stud is 4 inches long and 5/8"-11 UNC thread that fits any hub that requires a 5/8 stud with a .350 knurled shoulder. The stud is made from high quality grade 8 pre-stressed aerospace material and is black oxide coated for ultimate durability and corrosion resistance. The stud is ideal when you want to run up to a 1" wheel spacer.

part #10164

Pages