Store

2015-2017 Mustang Shelby GT350 Non Catted Section

Dynatech is proud to announce the launch of our new exhaust system for your ‘15-‘17 Ford Mustang Shelby GT350. Simply installing this system nets you a gain of 26 Horsepower and 13 ft.-lbs. of Torque with a tune. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included. They are available with catted or non-catted intermediate sections. All Dynatech headers come with full color instructions for easy installation. Unleash the full potential of your Mustang today.

part #722-65330

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

2015-2017 Mustang Shelby GT350 Catted Section

Dynatech is proud to announce the launch of our new exhaust system for your ‘15-‘17 Ford Mustang Shelby GT350. Simply installing this system nets you a gain of 26 Horsepower and 13 ft.-lbs. of Torque with a tune. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included. They are available with catted or non-catted intermediate sections. All Dynatech headers come with full color instructions for easy installation. Unleash the full potential of your Mustang today.

part #722-65320

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

2015-2017 Mustang Shelby GT350 Headers

Dynatech is proud to announce the launch of our new exhaust system for your ‘15-‘17 Ford Mustang Shelby GT350. Simply installing this system nets you a gain of 26 Horsepower and 13 ft.-lbs. of Torque with a tune. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included. They are available with catted or non-catted intermediate sections. All Dynatech headers come with full color instructions for easy installation. Unleash the full potential of your Mustang today.

part #722-65310

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

'16-'17 Camaro 2.75” Intermediate Tubes With Powercat Plus Dynatech

This Dynatech Catted Intermediate Section is an excellent way to complete your New Stainless Steel Header System for the '16-'17 Camaro. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included.

part #715-76020

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Stainless Steel '16-'17 Camaro Headers Non-Catted Section Dynatech

This Dynatech Non-Catted Intermediate Section is an excellent way to complete your New Stainless Steel Header System for the '16-'17 Camaro. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included.  

part #715-75530

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Stainless Steel '16-'17 Camaro Headers Catted Section Dynatech

This Dynatech Catted Intermediate Section is an excellent way to complete your New Stainless Steel Header System for the '16-'17 Camaro. O2 extension cables, triple layer stainless steel gaskets, header bolts, and all installation hardware are included.  

part #715-75520

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Stainless Steel '16-'17 Camaro Headers 2.00" Primary Tube Dynatech

Dynatech is proud to announce our new SuperMaxx System for the 2016-2017 Camaro. Simply installing this system nets you a gain of 36 Horsepower and 25 ft.-lbs. of Torque. All Dynatech headers come with full color instructions for easy installation.  This system can be installed in as little as 4 hours.  100% 304 Stainless Steel Construction with a Limited Lifetime Warranty makes this system second to none.

part #715-76010

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Stainless Steel '16-'17 Camaro Headers 1.88" Primary Tube Dynatech

Dynatech is proud to announce our new SuperMaxx System for the 2016-2017 Camaro. Simply installing this system nets you a gain of 36 Horsepower and 25 ft.-lbs. of Torque. All Dynatech headers come with full color instructions for easy installation.  This system can be installed in as little as 4 hours.  100% 304 Stainless Steel Construction with a Limited Lifetime Warranty makes this system second to none.

part #715-75510

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

HEADER SET C7/ZO6 CORVETTE DYNATECH

Dynatech is proud to announce the launch of our new SuperMAXX System for the C7 Corvette. This is a must have for any C7 or C7 ZO6 owner. Simply installing this system nets you a gain of 25 Horsepower and 25 ft.-lbs. of Torque. All Dynatech headers come with full color instructions for easy installation. 100% 304 Stainless Steel construction with a Limited Lifetime Warranty makes this system second to none.
PRIMARY TUBE SIZE: 1.875
COLLECTOR SIZE: 3
SYSTEM TUBE SIZE: 3
MATERIAL: All Stainless Steel
TRANS: Manual & Automatic
INCLUDED: Detailed instructions, and all needed hardware.
FIT: Direct Bolt-Up to any factory or O.E. size aftermarket cat back.
INSTALL TIME: 10-12 hours
+25 HORSEPOWER
+25 FT-LBS TORQUE"

part #715-63810

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATTED SECTION C7 CORVETTE SYSTEM DYNATECH

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2014-2017 C7 Corvette. Designed with High-flow metallic substrate catalytic convertors which flow 54% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX system second to none. Fits with automatic or manual transmissions and takes about 10-12 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 715-63810).

part #715-63820

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

NON CATTED SECTION C7 ZO6 CORVETTE SYSTEM DYNATECH

SuperMAXX Stainless Non-Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2014 - 2017 C7/ZO6 Corvette. This system is all about increased power with a full race, straight through system from the header to the cat-back. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX system second to none. Fits with automatic or manual transmissions and takes about 10-12 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 715-63810).

part #715-63830

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

HEADER GASKET LS (GM) ENGINE STAINLESS STEEL 2.00 PORT

Dynatech Triple Layer Stainless Steel Gaskets are the premium gaskets demanded by many enthusiasts and racers alike. The OEM style, triple layer design with ports to fit a wide variety of applications, are sure to provide many years of service. Sold in pairs.

part #794-30005

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATTED SECTION C7 ZO6 CORVETTE SYSTEM DYNATECH

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2014-2017 C7 ZO6 Corvette. Designed with High-flow metallic substrate catalytic convertors which flow 54% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX system second to none. Fits with automatic or manual transmissions and takes about 10-12 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 715-63810).

part #715-63920

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

2015-2017 Mustang Intermediate Tubes With Cats

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2015-2017 Mustang. Designed with High-Flow metallic substrate catalytic convertors which flow 54% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. With a unique 3.00 Ball & Socket connection to the header and 3.00 tubes, this makes a great combination for stock engines and/or upgraded power plants. With an exclusive design only from Dynatech, this system replaces the suitcase resonators and connects directly to the axle-back system. Fits with automatic or manual transmissions and takes about 5-7 hours to install. Comes complete with detailed, full color instruction manual for easy installation. O2 Extension cables, and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 722-74310)

part #722-75320

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Pages