Store

HEADER TRUCK AND SUV 2003-2005 2WD 5.7 HEMI RAM 1500 1.750 INCH STAINLESS STEEL DYNATECH

SuperMAXX Stainless Long Tube Headers are an excellent way to bolt on 17 hp and 15 Ft. Lbs. of Tq. to your 2003 2005 2WD Dodge Ram 1500 Truck with a 5.7 Hemi engine. Although a tune is recommended, these power gains were before the tune! A power tune could add another 20-25 hp. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. 1.750 primary tubes and a 2.50 collector make a great combination for stock engines and/or upgraded power plants. Fits with automatic or manual transmissions and takes about 4-6 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables, triple layer stainless steel gaskets, header bolts and all installation hardware are included. Designed for use with Dynatech intermediate sections (part numbers 724-84320 or 724-84520) .

California Proposition 65 Statement

part #724-84310

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATTED SECTION TRUCK AND SUV 2003 2WD 5.7 HEMI RAM 1500 2.50 INCH STAINLESS STEEL DYNATECH

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2003 2WD Dodge Ram 1500 with a 5.7 Hemi engine. Designed with High-flow catalytic convertors which flow 30% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. With a unique 2.50 Ball & Socket connection to the header and 3.00 tubes to connect to the factory or an aftermarket cat-back, this makes a great combination for stock engines and/or upgraded power plants. Fits with automatic or manual transmissions and takes about 4-6 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 724-84310).

California Proposition 65 Statement

part #724-84320

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

HEADER TRUCK AND SUV 2003-2005 4WD 5.7 HEMI RAM 1500 1.750 INCH STAINLESS STEEL DYNATECH

SuperMAXX Stainless Long Tube Headers are an excellent way to bolt on 17 hp and 15 Ft. Lbs. of Tq. to your 2003-2005 or 4WD Dodge Ram 1500 Truck with a 5.7 Hemi engine. Although a tune is recommended, these power gains were before the tune! A power tune could add another 20-25 hp. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. 1.750 primary tubes and a 2.50 collector make a great combination for stock engines and/or upgraded power plants. Fits with automatic or manual transmissions and takes about 4-6 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables, triple layer stainless steel gaskets, header bolts and all installation hardware are included. Designed for use with Dynatech intermediate sections (part numbers 724-84420 or 724-84620) .

California Proposition 65 Statement

part #724-84410

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATTED SECTION TRUCK AND SUV 2004-2005 2WD 5.7 HEMI RAM 1500 2.50 INCH STAINLESS STEEL DYNATECH

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2004 2005 2WD Dodge Ram 1500 with a 5.7 Hemi engine. Designed with High-flow catalytic convertors which flow 30% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. With a unique 2.50 Ball & Socket connection to the header and 3.00 tubes to connect to the factory or an aftermarket cat-back, this makes a great combination for stock engines and/or upgraded power plants. Fits with automatic or manual transmissions and takes about 4-6 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 724-84310).

California Proposition 65 Statement

part #724-84520

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATTED SECTION TRUCK AND SUV 2004-2005 4WD 5.7 HEMI RAM 1500 2.50 INCH STAINLESS STEEL DYNATECH

SuperMAXX Stainless Catted Intermediate Section is an excellent way to complete your Dynatech Header System on your 2004-2005 4WD Dodge Ram 1500 with a 5.7 Hemi engine. Designed with High-flow catalytic convertors which flow 30% better than OEM, its easy to see why this system is all about increased power. 100% Stainless Steel construction with a Limited Lifetime Warranty makes the SuperMAXX header second to none. With a unique 2.50 Ball & Socket connection to the header and 3.00 tubes to connect to the factory or an aftermarket cat-back, this makes a great combination for stock engines and/or upgraded power plants. Fits with automatic or manual transmissions and takes about 4-6 hours to install. Comes complete with a detailed, full color instruction manual for easy installation. O2 Extension cables and all installation hardware are included. Designed for use with Dynatech Long Tube Headers (part number 724-84410).

California Proposition 65 Statement

part #724-84620

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATALYTIC CONVERTOR POWERCAT 2.25 INCH INLET / OULET 11.5 INCHES LONG STAINLESS STEEL DYNATECH

The Dynatech PowerCAT catalytic convertor uses the latest technology in catalytic convertor design. Utilizing a Premium Metallic Substrate internal design, the flow is superior over a factory style convertor. These convertors have shown to flow 54% better than a stock O.E. design. Featuring a 4.00 O.D., 100% Stainless Steel shell and a quicker light off due to higher thermal conductivity, its easy to see why the PowerCAT will last as well as it performs. The smaller design requires much less space and weighs considerably less. Available for 2.25, 2.50 and 3.00 exhaust systems. Each end is made to slip over the intended size.

California Proposition 65 Statement

part #779-40022

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATALYTIC CONVERTOR POWERCAT 2.50 INCH INLET / OULET 11.5 INCHES LONG STAINLESS STEEL DYNATECH

The Dynatech PowerCAT catalytic convertor uses the latest technology in catalytic convertor design. Utilizing a Premium Metallic Substrate internal design, the flow is superior over a factory style convertor. These convertors have shown to flow 54% better than a stock O.E. design. Featuring a 4.00 O.D., 100% Stainless Steel shell and a quicker light off due to higher thermal conductivity, its easy to see why the PowerCAT will last as well as it performs. The smaller design requires much less space and weighs considerably less. Available for 2.25, 2.50 and 3.00 exhaust systems. Each end is made to slip over the intended size.

California Proposition 65 Statement

part #779-40025

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

CATALYTIC CONVERTOR POWERCAT 3.00 INCH INLET / OULET 11.5 INCHES LONG STAINLESS STEEL DYNATECH

The Dynatech PowerCAT catalytic convertor uses the latest technology in catalytic convertor design. Utilizing a Premium Metallic Substrate internal design, the flow is superior over a factory style convertor. These convertors have shown to flow 54% better than a stock O.E. design. Featuring a 4.00 O.D., 100% Stainless Steel shell and a quicker light off due to higher thermal conductivity, its easy to see why the PowerCAT will last as well as it performs. The smaller design requires much less space and weighs considerably less. Available for 2.25, 2.50 and 3.00 exhaust systems. Each end is made to slip over the intended size.

California Proposition 65 Statement

part #779-40030

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

BAND CLAMP 2.50 INCH STEPPED STAINLESS STEEL DYNATECH

Dynatech Stainless Band Clamps offer proven reliability when sealing up any exhaust system. Unlike the typical 1.00 wide clamp that only makes contact with one of the exhaust pipes, this clamp is 3.00 wide and stepped. This allows the clamp to make contact with both exhaust tubes and seal up the slip fit connection. These are used on all of the Dynatech SuperMAXX Exhaust Systems. With excellent sealing capability, they are commonly used with connections near O2 sensors where sealing must be at a premium. Available in 2.5, 2.75, 3.00 and 3.50. Sold individually.
California Proposition 65 Statement

part #789-70250

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

BAND CLAMP 2.75 INCH STEPPED STAINLESS STEEL DYNATECH

Dynatech Stainless Band Clamps offer proven reliability when sealing up any exhaust system. Unlike the typical 1.00 wide clamp that only makes contact with one of the exhaust pipes, this clamp is 3.00 wide and stepped. This allows the clamp to make contact with both exhaust tubes and seal up the slip fit connection. These are used on all of the Dynatech SuperMAXX Exhaust Systems. With excellent sealing capability, they are commonly used with connections near O2 sensors where sealing must be at a premium. Available in 2.5, 2.75, 3.00 and 3.50. Sold individually.

part #789-70275

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

BAND CLAMP 3.00 INCH STEPPED STAINLESS STEEL DYNATECH

Dynatech Stainless Band Clamps offer proven reliability when sealing up any exhaust system. Unlike the typical 1.00 wide clamp that only makes contact with one of the exhaust pipes, this clamp is 3.00 wide and stepped. This allows the clamp to make contact with both exhaust tubes and seal up the slip fit connection. These are used on all of the Dynatech SuperMAXX Exhaust Systems. With excellent sealing capability, they are commonly used with connections near O2 sensors where sealing must be at a premium. Available in 2.5, 2.75, 3.00 and 3.50. Sold individually.
California Proposition 65 Statement

part #789-70300

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

BAND CLAMP 3.50 INCH STEPPED STAINLESS STEEL DYNATECH

Dynatech Stainless Band Clamps offer proven reliability when sealing up any exhaust system. Unlike the typical 1.00 wide clamp that only makes contact with one of the exhaust pipes, this clamp is 3.00 wide and stepped. This allows the clamp to make contact with both exhaust tubes and seal up the slip fit connection. These are used on all of the Dynatech SuperMAXX Exhaust Systems. With excellent sealing capability, they are commonly used with connections near O2 sensors where sealing must be at a premium. Available in 2.5, 2.75, 3.00 and 3.50. Sold individually.

part #789-70350

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

V CLAMP COLLAR 2.50 INCH STAINLESS STEEL DYNATECH

Dynatech V-Clamp Collar Kits are and excellent way to connect exhaust components that need to be removed from time to time. These connections are used in many turbo applications or any application that requires an excellent, leak free seal, that needs to be removable. The stainless steel clamp allows for a strong, durable clamping device that keeps the seal tight. The mild steel rings make it easy for anyone to weld them to any exhaust component. Kit includes one sealing clamp and two sealing rings.
California Proposition 65 Statement

part #794-91225

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

V CLAMP COLLAR 3.00 INCH STAINLESS STEEL DYNATECH

Dynatech V-Clamp Kits are a must have for any custom exhaust build. Used in many applications from custom exhaust to turbo applications, this is a durable way to seal the exhaust. Removable at any time, this allows you to remove parts of the exhaust system if needed. Stainless Steel clamps with mild steel rings, allow for easy welding to the exhaust pipes. Kit includes two rings and one clamp.
California Proposition 65 Statement

part #794-91230

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

V CLAMP COLLAR 3.50 INCH STAINLESS STEEL DYNATECH

Dynatech V-Clamp Collar Kits are and excellent way to connect exhaust components that need to be removed from time to time. These connections are used in many turbo applications or any application that requires an excellent, leak free seal, that needs to be removable. The stainless steel clamp allows for a strong, durable clamping device that keeps the seal tight. The mild steel rings make it easy for anyone to weld them to any exhaust component. Kit includes one sealing clamp and two sealing rings.
California Proposition 65 Statement

part #794-91235

These products are intended for racing and off-road applications. Not legal for sale or use in the state of Ca

Pages